Vinyl Pool Build

A. Find a flat area in your yard that is large enough to have a pool and its surrounding deck. Typically, the edge of your pool needs to be a minimum of 5-7 feet away from any structure such as a house, a shed or a fence. If your yard is not predominately flat then you first need to make preparations to have your yard leveled to grade before you can have a pool.
B. Take good measurements of your yard including length and width of the determined area.
C. Try and visualize how your pool area will look with your desired pool, decking, landscaping, etc.
Sketch out a drawing to depict how you want your pool area to look. Sample Hand Drawn Pool Plan

A. Vinyl Liner Pools: the standard sizes are 10'x 20', 12'x 24', 14'x 28', 16'x 32', 18'x 36' and 20'x 40'. There are many other sizes and options fro overall length and width as well.

A. Vinyl Liner Pools: the standard depths are 42" and 48" for the shallow end; then anywhere from 48" to 8'0" for the deep end. Steps can be located in many various different places that work well. I't important to consider the best spot for your stairs, steps, benches, etc.

A. Find an area not too far from your pool.
B. You will need a pool pump and filter but you may want to add some additional equipment such as a heater, a salt chlorination generator, an auto-vac pool sweeper or even safety pool cover.
C. Update your hand drawn pool plan by marking the location of your pool equipment.

A. You will need to give your pool designer an accurate set of plans to work from to design your pool and placement thereof.
B. The plans will need to have measurements of property lines, structures, obstructions and certain obstacles. Also needed are measurements that display dimensions between property lines/fence lines and structures/house.
C. Most important, make sure that good accurate measurements are taken and displayed on your proposed pool area plan. There is no such thing as too many measurements.
D. Take pictures of your pool area for reference.
E. A hand drawn proposed pool plan works fine as long as it is legible.
Vinyl Liner Pool Plans

A. First decide if all you want is the bare essentials or if you would like to have more done, such as: engineering, renderings, details, etc.
B. Remember that plan design is a necessary step and should not be skipped. You will need them for proper construction and permitting.
C. The bare essential plans (required) you will need are 1) pool layout plan, 2) dig plan and 3) pool placement plan. In many places you will also be required to have engineering plans.
D. With the these pool plans you will be able to get a pool construction permit and start your pool. After you have already gotten your permit and find that you need to make a change, no worries, you need only submit the changes to the building department. Keep in mind, your building department has certain guidelines that will be issued to you and as long as you stay within those guidelines you should have nothing to worry about.
Vinyl Liner Pool Plans

A. Layout and mark the exact and final resting location for your pool.
B. Pool site is cleared and pool hole is dug.
C. Trenches are dug for plumbing lines, for electrical lines and for other items that will be submerged underground.
D. Pool hole bottom is leveled, graded, and lined with sand for a sand bed.

A. Pool is carefully set into place (typically using a crane for a vinyl pool shell) (set by hand for a vinyl liner pool kit).
B. Elevations are shot during the backfill process to ensure pool is level.
C. Trenches are dug for plumbing lines, for electrical lines and for other items that will be submerged underground.
D. Pool is carefully set. Elevations are shot during the backfill process to ensure pool is level.

A. Set pool equipment on equipment pad.
B. Plumb from the pool shell to the equipment.
C. Test plumbing bonds by holding a consistent amount of pressure for at least ten minutes.

A. For Vinyl Liner Pools: while pool shell is being filled with water, the hole around the pool shell is being backfilled with sand or pea gravel. Sand is typically washed in and the backfill level should always be about the same as the level of water in the pool. This process repeats until water level is full and the sides around the pool are completely full.

A. An electrician will need to do all the electrical hook ups.
B. Electrical supply needs to be run to the equipment pad area prior to installation of your pool kit.
C. If you are getting a gas heater, a gas plumber will run the gas lines and bond the joints.
D. You might need to upsize your gas meter for your property.

A. Once your backfill is done around your pool you will need to have the rest of your yard graded to the levels you want.
B. If you need dirt hauled off then you will need to get someone with a dumb truck and a loader.
C. If you need to get landscaping done then you will need to get a landscaper.

A. There are various options that pool owners choose for pool decking. Such as concrete, travertine, pavers, tile, etc.

A. Pool vinyl liner is placed and positioned, aligned with the overall shape of the pool. The air behind the liner is removed while the vinyl pool is being filled.

A. There are various options that pool owners choose for pool decking. Such as concrete, travertine, pavers, tile, etc.